TYANO S7126, Руководство пользователя

Страница: 128 / 224

http://www.tyan.com
128
USB transfer time-out
The time-out value for Control, Bulk and Interrupt transfers.
1 sec / 5 sec / 10 sec / 20 sec
Device reset time-out
USB mass storage device Start Unit command time-out.
10 sec / 20 sec / 30 sec / 40 sec
Device power-up delay
Maximum time the device will take before it properly reports itself to the Host
Controller. ‘AUTO’ uses default value: for a Root port it is 100 ms, for a Hub port the
delay is taken from Hub descriptor.
Auto / Manual
NOTE: Device power up delay in seconds is available when Device power-up
delay is set to [Manual].
Device power-up delay in seconds
Delay range is 1…40 seconds, in one second increments.
5
AMI Virtual CDROM0 1.00
Mass storage device emulation type. ‘Auto’ enumerates devices according to their
media format. Optical drives are emulated as ‘CDROM’, drives with no media will be
emulated according to a drive type.
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM
AMI Virtual HDisk0 1.00
Mass storage device emulation type. ‘Auto’ enumerates devices according to their
media format. Optical drives are emulated as ‘CDROM’, drives with no media will be
emulated according to a drive type.
Auto / Floppy / Forced FDD / Hard Disk / CD-ROM