TYANO GX38-B5550 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 68

TYANO GX38-B5550 Скачать руководство пользователя страница 3

3

http://www.tyan.com

PREFACE

Copyright

This publication, including all photographs, illustrations, and software, is protected
under international copyright laws, with all rights reserved.
Neither this manual, nor any material contained herein, may be reproduced without
written consent of manufacturer.

Copyright 2019 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights
reserved.

TYAN

®

is a registered trademark of MITAC COMPUTING TECHNOLOGY

CORPORATION.

Version 1.0a

Disclaimer

Information contained in this document is furnished by MITAC COMPUTING
TECHNOLOGY CORPORATION and has been reviewed for accuracy and reliability
prior to printing. MITAC assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of TYAN

®

products including liability

or  warranties relating to fitness for a particular purpose or merchantability. MITAC
retains  the  right  to  make  changes  to  produce  descriptions  and/or  specifications  at
any  time,  without  notice.  In  no  event  will  MITAC  be  held  liable  for  any  direct  or
indirect,  incidental  or  consequential  damage,  loss  of  use,  loss  of  data  or  other
malady  resulting  from  errors  or  inaccuracies  of  information  contained  in  this
document.

Trademark Recognition

All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.

TYAN

®

is a trademark of MITAC COMPUTING TECHNOLOGY CORPORATION.

Intel

®

is a trademark of Intel

®

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

IBM

®

, PC

®

, AT

®

and PS/2

®

are trademarks of IBM Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

«
1
2
3
4
5
...
»

Содержание GX38-B5550





































































Отзывы:

Нет отзывов