TYAN YR290 B7018-D2, Руководство сервисного инженера

Страница: 49 / 76

49
http://www.tyan.com
3.3 Replacing Motherboard Components
Follow these instructions to replace motherboard components, including the
motherboard.
Follow Chapter 2.1.1 to pull the node out.
3.3.1 Replacing Expansion Card
The YR290 B7018-D2 has a pre-installed M7018-R16-1F1YR1L PCI-E riser
card,
Follow the instructions below to disassemble the M7018-R16-1F1YR1L and
install a new riser card.
NOTE: The 2
nd
PCI-E slot on the M7018 R16-1F1YR1L PCIe Riser Card is a
proprietary slot for the TYAN P3202 SAS card ONLY . The use of any other
PCI-E card could result in damage to the M7018 R16-1F1YR1L PCIe Riser Card
or 3
rd
party PCI-E card directly
1. Disconnect the mini SAS cables.
SATA/SAS Backplane (BP) Board to HBA Card (for SAS interface)
Cable
SATA/SAS BP
Board
Connect to HBA Card
Mini-SAS Cable-1
(36P to 36P)
Mini SAS1
→
SAS Port1 (J1)
Mini-SAS Cable-2
(36P to 36P)
Mini SAS2
→
SAS Port2 (J2)
2. Unscrew the Riser Card Assembly to lift it up.