http://www.TYAN.com
13
2.04 – Clear CMOS Jumper (J8)
Pin_3
Pin_1
Default
Pin_3
Pin_1
Clear
You can reset the CMOS settings by
using this jumper if you have forgotten
your system/setup password or need to
clear system BIOS setting.
-
Power off system and
disconnect
both power connectors from the
motherboard
-
Use jumper cap to close Pin_2 and
Pin_3 for several seconds to Clear
CMOS
-
Put jumper cap back to Pin_1 and
Pin_2 (default setting)
Reconnect power & power on system
2.05 – SMBus Connector (J11)
Pin_1
Pin_1:
SMBUSD_0
Pin_2:
GND
Pin_3:
SMBUSC_0
Pin_4
:
NC
Use this connector to connect external
SMBUS devices
