TYAN THUNDER HESL-T, Руководство пользователя

Страница: 22 / 48

22
http://www.TYAN.com
3.2-A Super IO Configuration
Options related to the IO interface can be altered through the following.
Serial Port 1, 2
Enabled (d)
Disabled
Auto
Toggles use of serial ports
A and or B.
Enabling ports
also requires you to enter
the I/O address for that
port unless you select
Auto .
Serial 2 Mode
Enabled (d)
Disabled
Toggles the onboard Serial
B port.
Serial Base I/O
3F8, 2F8 (d)
3E8, 2E8
These options are
dependent on the IRQ and
vice versa.
Serial Interrupt
IRQ3 (d)
IRQ4
These IRQs are paired
with the Base I/O option.
Recommended config:
2F8 & IRQ3
3F8 & IRQ4
Parallel Port
Enabled
Disabled
Auto (d)
Enabled requires manual
input of port parameters.
We recommend you leave
this option on
Auto .
Output Only (d) Standard one-way protocol
for parallel devices.
Bi-directional Two-way protocol
EPP Enhanced Parallel Port
may provide higher
bandwidth if an
EPP
compliant device is used
(e.g. parallel Zip drive).
Parallel Port Mode
ECP Enhanced Compatibility
Port may provide higher
bandwidth if an
ECP
compliant device is used
(e.g. parallel Zip drive).
Parallel Address
378 (d)
278
3BC
These options appear
when the parallel port is
set to
Enabled .
Parallel IRQ
IRQ5 (d)
IRQ7
These options appear
when the parallel port is
set to
Enabled .
ECP DMA Channel
DMA1 (d)
DMA2
These options appear
when parallel port is set to
Enabled .
3.2-B IDE Configuration
Options related to the IDE controller can be altered through the following.
Onboard PCI IDE
Controller
Both (d)
Primary
Secondary
Leave as Default .
Primary Master/Slave
Secondary Master/Slave
Auto (d)
Disabled
Leave as Default .