RC2200DB
2004 Radiocrafts AS
RC2200DB ZigBee Demonstration Board Quick Start (rev. 0.2)
Page 1 of 2
RC2200DB ZigBee™ Demonstration Board Quick Start
Introduction
The RC2200DB Demonstration Board shows a ZigBee™-ready home lighting profile. To
make the demonstration a minimum of two (optionally three) boards are used:
1. Switch Load Controller (SLC) configured as network coordinator
2. Switch Remote Control (SRC) configured as network router
3. A second Switch Remote Control (SRC) configured as network router (optional)
To monitor the ZigBee network communication a “packet sniffer” application could be installed
on a PC. However, this is not required to do a simple demonstration.
