TYAN Tempest i5000VF S5370 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 75

background image

1

Tempest i5000VF

///

S5370

Version 1.2

Copyright

Copyright © TYAN Computer Corporation, 2006. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.

TYAN, Tempest i5000VF are trademarks of TYAN Computer Corporation.
Intel, Blackford-VS, and combinations thereof are trademarks of Intel
Corporation.
Phoenix, Phoenix-AwardBIOS are trademarks of Phoenix Technologies.
Microsoft, Windows are trademarks of Microsoft Corporation.
SuSE,is a trademark of SuSE AG.
IBM, PC, AT, and PS/2 are trademarks of IBM Corporation.

Notice

Information contained in this document is furnished by TYAN Computer
Corporation and has been reviewed for accuracy and reliability prior to printing.
TYAN assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN products including liability or
warranties relating to fitness for a particular purpose or merchantability. TYAN
retains the right to make changes to product descriptions and/or specifications
at any time, without notice. In no event will TYAN be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.

1
2
3
...
»

Содержание Tempest i5000VF S5370












































































Отзывы:

Нет отзывов

Похожие инструкции для Tempest i5000VF S5370

Бренд: MSI Страницы: 19

Бренд: TYAN Страницы: 82

Бренд: Giada Страницы: 2

Бренд: AOpen Страницы: 96

Бренд: Intel Страницы: 78

Бренд: Intel Страницы: 76

Бренд: ablelogic Страницы: 47

Бренд: BIGTREETECH Страницы: 39

Бренд: MSI Страницы: 104

Бренд: Texas Instruments Страницы: 9

Бренд: MSI Страницы: 91

Бренд: C-Control Страницы: 8

Strata Enabled NCV6357

Бренд: ON Semiconductor Страницы: 6

Бренд: Biostar Страницы: 65

IONITX-N series

Бренд: Zotac Страницы: 50

Бренд: AXIOMTEK Страницы: 67

Бренд: IEI Technology Страницы: 156

Бренд: Gigabyte Страницы: 70

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды