TYAN S5191, Руководство пользователя

Страница: 51 / 81

51
http://www.tyan.com
3.4.3 I/O Device Configuration
This setting allows you to configure I/O devices.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
I/O Device Configuration
Item Specific Help
Serial port A:
Base I/O address:
Interrupt:
Serial port B:
Base I/O address:
Interrupt:
Parallel port:
Mode:
Base I/O address:
Interrupt:
Floppy disk controller:
[Enabled]
[3F8]
[IRQ 4]
[Enabled]
[2F8]
[IRQ 3]
[Enabled]
[Bi-directional]
[378]
[IRQ 7]
[Enabled]
Configure serial port A
using options:
[Disabled]
No configuration
[Enabled]
User Configuration
[Auto]
BIOS or OS chooses
configuration
(OS Controlled)
Displayed when
controlled by OS
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X
Sub-Menu F10 Previous Values
Serial Port A/B:
This defines how the serial port A/B is detected and configured.
Options: Disabled /
Enabled / Auto
Base I/O Address:
Set the base I/O address for serial port A/B.
Options:
3F8 / 2F8 / 3E8 / 2E8
Interrupt:
Set the interrupt for serial port A/B.
Options: IRQ3 /
IRQ4
Parallel Port
This defines how the parallel port is detected and configured.
Options: Disabled /
Enabled / Auto
Mode
This field allows the user to select the parallel port mode. The default value is
Standard that automatically selects the correct mode to use. The other modes are
explained as follows:
SPP works with all parallel port devices. However, it is the slowest transfer mode
and should only be used when faster transfer modes cannot be used.
There are two faster bidirectional modes available - the ECP (Extended Capabilities
Port) and EPP (Enhanced Parallel Port) modes.