TYAN S5191, Руководство пользователя

Страница: 43 / 81

43
http://www.tyan.com
Large Disk Access Mode
This option determines whether a hard drive with more than 1024 cylinders, more
than 16 heads and or more than 64 tracks per sector is present on the system. Set
this option to
DOS if such a hard drive is present. Else, set this option to Other .
Virtually, all modern hard disks have these characters so leave this option at DOS ,
unless you know otherwise.
Options:
DOS / Other
Route Port 80h cycles to
This feature allows you to route Port 80h I/O cycles to LPC or PCI bus.
Options:
LPC / PCI
Legacy USB Support
When enabled, the BIOS takes control of the USB ports. Enable this only if you run
an OS that does not support USB (e.g. DOS) or when you have USB hardware like
USB mice that you want to use even before the operating system loads.
Options:
Enabled / Disabled
3.4.1 Advanced Chipset Control
This section allows you to fine tune the chipset configuration.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Advanced Chipset Control
Item Specific Help
X Integrated Device Control Sub-Menu
X
PCI Express Sub-Menu
Onboard VGA Control
Default Primary Video Adapter
PXH Bus Frequency Control
Spread Spectrum
Parallel ATA:
Serial ATA:
Native Mode Operation:
SATA Controller Mode Option:
[Enabled]
[Auto]
[133MHz]
[Disabled]
[Enabled]
[Enabled]
[Auto]
[Compatible]
These items determine
whether the integrated
PCI Devices will be
Enabled in PCI Config
Space.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X
Sub-Menu F10 Previous Values
Onboard VGA Control
Enable or disable Onboard XGI 27 PCI VGA.
Options:
Enabled / Disabled
Default Primary Video Adapter
This feature is used to select the priority of initialing VGA card (PCI VGA or PCI-E
VGA).
Options:
Auto / PCI