TYAN S5191, Руководство пользователя

Страница: 49 / 81

49
http://www.tyan.com
3.4.2 Advanced Processor Options
This section allows you to fine-tune the processor options.
PhoenixBIOS Setup Utility
Main Advanced Security Power Boot Exit
Advanced Processor Options
Item Specific Help
Core Multi-Processing
Hyperthreading:
Thermal Management 2
Numbers of Stop Grant
Set Max Ext CPUID = 3
C1 Enhanced Mode
Intel ® Virtualization Technology
No Execute Mode Protection
Processor Power Management:
[Enabled]
[Enabled]
[Disabled]
[Per Core]
[Disabled]
[Enabled]
[Disabled]
[Enabled]
[GV1/GV3 Only]
Determines whether the
2nd core is enabled.
Disabled = 2
nd
core is
disabled
Enabled = 2
nd
core is
enabled
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select
X
Sub-Menu F10 Previous Values
Core Multi-processing
Determines whether the second core is enabled.
[Disabled]: the second core is disabled
[Enabled]: the second core is enabled.
Options:
Disabled / Enabled
Hyperthreading
Enable this only if you have an Intel Hyper Threading processor.
Hyper-Threading Technology enables multi-threaded software applications to
execute threads in parallel. Hyper-Threading Technology provides thread-level-
parallelism (TLP) on each processor resulting in increased utilization of processor
execution resources. As a result, resource utilization yields higher processing
throughput. Hyper-Threading Technology is a form of simultaneous multi-threading
technology (SMT) where multiple threads of software applications can be run
simultaneously on one processor. This is achieved by duplicating the architectural
state on each processor, while sharing one set of processor execution resources.
Hyper-Threading Technology also delivers faster response times for multi-tasking
workload environments. By allowing the processor to use on-die resources that
would otherwise have been idle, Hyper-Threading Technology provides a
performance boost on multi-threading and multi-tasking operations for the Intel
NetBurst® microarchitecture.
Options:
Enabled / Disabled
Thermal Management 2
Select between TM1 and TM2.
Options:
Disabled / Enabled
Numbers of Stop Grant
This feature is used to configure the numbers of Stop Grant.
Options:
Per Core / Single