TYAN S2927 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 88

background image

http://www.tyan.com

1

Thunder n3600B

///

S2927

Version 1.0

Copyright

Copyright © TYAN Computer Corporation, 2006. All rights reserved. No part of
this manual may be reproduced or translated without prior written consent from
TYAN Computer Corp.

Trademark

All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.

TYAN, Thunder n3600B are trademarks of TYAN Computer Corporation.
AMD, Opteron, and combinations thereof are trademarks of AMD Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft, Windows are trademarks of Microsoft Corporation.
SuSE,is a trademark of SuSE AG.
Marvell

®

is a trademark of Broadcom Corporation and/or its subsidiaries

XGI and XG20 are trademarks of XGI Corporation
nVIDIA, nForce are trademarks of NVIDIA Corporation.

Notice

Information contained in this document is furnished by TYAN Computer
Corporation and has been reviewed for accuracy and reliability prior to printing.
TYAN assumes no liability whatsoever, and disclaims any express or implied
warranty, relating to sale and/or use of TYAN products including liability or
warranties relating to fitness for a particular purpose or merchantability. TYAN
retains the right to make changes to product descriptions and/or specifications
at any time, without notice. In no event will TYAN be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.

1
2
3
...
»

Содержание S2927

























































































Отзывы:

Нет отзывов

Похожие инструкции для S2927

Бренд: Balluff Страницы: 62

Бренд: MACHINIST Страницы: 15

Бренд: Intel Страницы: 76

Бренд: ECS Страницы: 93

Бренд: Texas Instruments Страницы: 13

Бренд: JETWAY Страницы: 52

Бренд: Biostar Страницы: 51

Fatal1ty Professional Z97

Бренд: ASROCK Страницы: 144

Бренд: Gigabyte Страницы: 52

Бренд: Texas Instruments Страницы: 26

Бренд: Outboards Group Страницы: 44

Бренд: TRU Components Страницы: 4

SBC86620 Series

Бренд: AXIOMTEK Страницы: 90

Бренд: Laird Страницы: 17

Бренд: Avalue Technology Страницы: 83

Бренд: DFI Страницы: 107

Бренд: Intel Страницы: 92

Бренд: DFI Страницы: 109

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды