TYAN S2891, Руководство пользователя

Страница: 25 / 71

http://www.tyan.com
25
2.10 - Installing the Memory
Before attempting to install any memory, make sure that the memory you
have is compatible with the motherboard as well as the processor.
The following diagram shows common types of DDR SDRAM modules:
Here are a few key points to note before installing memory into your
Thunder K8SRE:
•
Always install memory beginning with CPU0 DIMMA1.
•
In order to access memory on CPU1, both processors must be
installed.
•
Single, pairs, or four modules are supported on each CPU.
•
Configure memory symmetrically on each CPU for best performance.
•
AMD Opteron
TM
processors support 64bit (non-interleaved) or 128bit
(interleaved) memory configurations
•
At least ONE Registered DDR SDRAM module must be installed for
the system to turn on and POST (power on self test)
•
128MB, 256MB, 512MB, 1GB, and 2GB* Registered DDR400/333/266
DDR memory modules are supported
•
All installed memory will be automatically detected
•
The Thunder K8SRE supports up to 16GB* with two CPU’s installed.
* Not validated at time of print