TYAN S2725, Руководство пользователя

Страница: 10 / 52

10
http://www.TYAN.com
2.4 – Jumper Settings
Jumper Function Ref. Page
J21 CMOS RESET Page 11
J22 External speaker header Page 50
J34 Serial Port internal header Page 50
J38 Wake On LAN
J39*** Hardware Monitor LED (Reserved) See below
J40 Front panel connector Page 12/50
J41** Hard disk activity LED external input See below
J42 SMDC (Server Management Daughter Card) connector Page 48
J43*** I
2
C bus connector ( Reserved ) See below
J50 USB header #2 Page 33/50
J51 USB header #3 Page 33/50
J53
&
J69
Intel 82546 GbE NIC 4-pin external LAN activity/link
LED header
Manufacturing option:
Intel 82545 GbE NIC 4-pin external LAN activity/link
LED header
Page 41/50
J55 Manufacturing option:
Intel 82551 10/100 NIC 4-pin external LAN activity/link
LED header
Page 41/50
JP3 FAN 3 current rate select Page 13
**
J41 is an LED INPUT. The idea is to run a wire from the activity LED output header of any plug-
in HD controller card (e.g. a RAID card) to the motherboard, so that the card's LED can be
"combined " with the IDE and SCSI activity indicators on the motherboard and then driven to the
J40 HD LED output. In other words, when a card's LED lights up, so will the front-panel hard-disk
activity indicator. This is useful for chassis that have only a single LED to indicate HD activity from
multiple controller sources. (Pin 1 = negative terminal of the add-on card's LED header, Pin 2 = do
not connect.)
*** These jumpers are reserved.