TYAN S2692, Руководство пользователя

Страница: 56 / 74

56
http://www.tyan.com
3.6 Boot
Use this screen to select options for the Boot Settings Configuration.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Exit
Item Specific Help
After Power Failure:
Halt on POST Errors:
Summary screen:
Quiet Boot:
QuickBoot Mode:
 Boot Device Priority
[Power On]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Sets the mode of
operation if an AC/Power
Loss occurs. The two
modes are:
Enabled restore the
previous power state
before loss occurred.
Disabled keep the power
off until the power button
is pressed.
The Disabled choice
turns off Resume on
Modem Ring.
F1 Help
↑↓
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
← →
Select Menu Enter Select

Sub-Menu F10 Previous Values
After Power Failure
Sets the mode of operation if an AC/Power Loss occurs. The two modes are:
[Enabled]: restores the previous power state before loss occurred.
[Disabled]: keeps the power off until the power button is pressed.
Options:
Power On / Stay Off / Last State
Halt on POST Errors
Enabled -> BIOS will halt & display error message if there is any POST error .
Disabled -> BIOS will not halt if there is any POST error.
Options: Enabled /
Disabled
Summary Screen
Enables or disables the display of the summary screen during boot up.
When Summary Screen is Enabled (the default), a Phoenix BIOS Setup Utility
summary screen appears during system boot after the power-on self-test (POST).
The summary screen lists many of the system setup settings. When this option is
set to Disabled, the summary screen does not appear.
Options:
Enabled / Disabled
Quiet Boot
Enables or disables the OEM logo screen during boot up.
Options: Enabled /
Disabled