TYAN S2692, Руководство пользователя

Страница: 19 / 74

http://www.tyan.com
19
P1: High Definition Audio Header
1
2
15
16
P1 is a standard HDA header,you can plug
another HDA audio card on it
.
Pin Signal Pin Signal
1 ACZ_BIT_CLK_HDA 2 GND1
3 ACZ_RST_N_HDA 4 DVDD
5 ACZ_SYNC_HDA 6 GND2
7 ACZ_SDOUT_HDA 8 DVDD_CORE
9 ACZ_ADIN_0_HDA 10 +12V
11 FNT_PRT_N_HDA 12 KEY
13 ACZ_SDIN_1_HDA 14 3.3VSBY
15 ACZ_SDIN_2_HDA 16 GND3
JP5: Clear CMOS Jumper
3
1
Default
1
3
Clear
You can reset CMOS settings by using this jumper if
you have lost your system/setup password or need to
clear the system BIOS settings.
Power off the system and set JP5 to (2-3) position, and
then power on the system. The CMOS will be cleared
when the POST screen is visible. Finally shut down the
power and move JP5 to it’s default (1-2) position and
power on the system again.
JP6/JP7/JP8: CPU Bus Clock Select Jumper
3
1
1-2 close: CPU select (Default)
1
3
2-3 close: 0
1 3
2-3 open: 1
JP18: Internal Buzzer Enable/Disable Jumper
1
Close: enable internal buzzer (Default)
1
Open: disable internal buzzer