Thunder i860 S2603
45
3.4 Power Setup
Options related to the onboard power functions can be altered through this setup screen.
3.5 Boot Setup
Options related to the boot functions can be altered through this setup screen.
Disabled
Enabled
If enabled, the system can
be powered on from a
remote location.
FORMAT:
[
option
]
OPTIONS:
Remote Power-on
FORMAT:
[
option
]
OPTIONS:
After Power Failure
Stay off
System stays off after
power is lost.
Power on
System will automatically
power on when a power
input signal is detected by
the BIOS.
Last state
System will automatically
power on and retain the
last state it was in, once a
power input signal is
detected by the BIOS.
Disabled
Enabled
If enabled, boot time will
decrease but some tests
will not be run in POST.
FORMAT:
[
option
]
OPTIONS:
Quickboot Mode
Disabled
Enabled
If enabled, messages
from each option ROM
will be shown.
FORMAT:
[
option
]
OPTIONS:
Disp Option ROM Messages
PCI
AGP
Selects preferred video
bus to initialize at bootup
time.
FORMAT:
[
option
]
OPTIONS:
Preferred Video
Disabled
Enabled
If enabled, the boot sum-
mary screen will show
during bootup.
FORMAT:
[
option
]
OPTIONS:
Summary Screen
Boot Device Priority
Discussed
below
(dependent on
devices detected)
Each item detected as a
removeable device, will
be listed in this section.
As the user presses the
‘+’ key, the item will move
up in priority. The item at
the top will take first prior-
ity, the second item takes
next highest priority, and
so on.
FORMAT:
[
option
]
OPTIONS:
(menu dependent on devices
detected