http://www.tyan.com
30
2.13 Connecting the power supply
This motherboard requires a
dual Xeon-compatible power supply, such as the NMB
IT002A430WSW
.
Note the clip
Figure 2.4a
Figure 2.4c
Figure 2.4d
Note the clip
Figure 2.4b
The power supply for the Thunder
i860 has
two power plugs
, with
clips
.
Both
plugs must be installed in order
to properly run the Thunder i860!
Failure to install both plugs may
result in damage to the board!
Shown on the right are two images of
the
8-pin power plug
.
This plug should be installed
first
to
ensure that the board will operate
properly.
When you install the plugs, make sure
the
clips
are installed over the
power
socket tabs
.
The other power plug has
24-pins
.
This plug
also needs to be installed
.
The 24-pin power plug is shown on
the
right
.
Take extra care that the clip matches
the power socket tab on the 24-pin
power connector as well.
Make sure all pins have been con-
nected, or damage may occur to the
board.
Tyan takes no reponsibility and will
not be held liable for damage due
to incorrect power supply installa-
tion.
1
Step
2
Step
3
Step
4
Step
