TYAN S2380 Trinity K7 Скачать руководство пользователя страница 47

Страница: 47 / 72

S2380 Trinity K7

Memory Hole

This option specifies the location of an area of memory that cannot be

addressed on the ISA bus. The settings are Disabled, 512KB-64KB, or 15MB-

16MB.

P2C/C2P Concurrency

By enabling this function the PCI/AGP Master to CPU Cycle can be concurrent

if the Host CPU is performing R/W access to the PCI or slave devices.

Fast Read Write turn-around

If Enabled, it reduces the turn around time for a memory read which is followed

by a memory write consecutively.

System BIOS Cacheable

If Enabled, results in better system performance by permitting caching of the

system BIOS ROM at F0000h-FFFFFh. Any program which tries to write to this

memory area, however, may cause a system error.

Video RAM Cacheable

Increases video performance by caching video memory.

AGP Aperture Size

Select the size of the Accelerated Graphics Port (AGP) aperture. The aperture is

a portion of the PCI memory address range dedicated for graphics memory

address space. Host cycles that hit the aperture range are forwarded to the

AGP without any translation. See www.agpforum.org for AGP information.

AGP-4x Mode

Enables the 4X AGP mode for higher AGP throughput. A 4X AGP graphics

card is required to enable this function.

Due to Tyans commitment to advanced technologies and first to market, not

all high performance 4X AGP graphics cards are compatible w/ our S2380 at the

time of print, please go to our web site for the latest update.

AGP Driving Control/Value

This sets the Driving Control value of the 4x AGP video card. Default settings

are set to Auto/ DA.

AGP Fast Write

This function allows the AGP port to function at a increased rate. Enable this

function to allow faster graphics performance.

BIOS

Содержание S2380 Trinity K7









































































Результаты поиска

Содержание S2380 Trinity K7

Отзывы:

Похожие инструкции для S2380 Trinity K7

Бренды по названию

Популярные бренды

TYAN S2380 Trinity K7, Руководство пользователя

Результаты поиска

Содержание S2380 Trinity K7

Отзывы:

Похожие инструкции для S2380 Trinity K7

Бренды по названию

Популярные бренды