http://www.tyan.com
32
3.2. Advanced Setup
Options such as I/O device interfaces can be altered through this screen.
3.2-A. Configure Nat366 Serial Port(s) and Parallel Port (Super I/O)
In this screen you can configure the different hardware ports available, change the status of the floppy
controller, and more.
Onboard Floppy Controller
FORMAT:
OPTIONS:
Disabled
Enabled
[
option
]
NOTES:
Enables or disables the onboard floppy con-
troller.
Serial Port Address
FORMAT:
OPTIONS:
Disabled
#### (address)
[
option
]
NOTES:
You can enable the serial port through this
option, and also by setting the address.
IR
Normal
Selects the mode to use.
IR = Infrared
FORMAT:
[
option
]
OPTIONS:
Serial Port 2 Mode
NOTES:
This option is only for Serial Port 2.
Parallel Port Address
FORMAT:
OPTIONS:
Disabled
### (address)
[
option
]
NOTES:
You can enable the parallel port through this
option, and also by setting the address.
IRQ5
IRQ7
These options appear
when the parallel port is
enabled.
FORMAT:
[
option
]
OPTIONS:
Parallel Port IRQ
Normal
Standard one-way proto-
col for parallel devices.
FORMAT:
[
option
]
OPTIONS:
Mode
Bi-directional
Two-way protocol for par-
allel devices.
EPP
Enhanced Parallel Port
interface may provide
higher bandwidth, if an
EPP device is used.
ECP
Enhanced Capability Port
interface may provide
higher bandwidth, if an
ECP device is used.
