TYAN S2054 Скачать руководство пользователя страница 1

Страница: 1 / 73

Tyan S2054

Tomcat i810

Motherboard Users Manual

Revision 1.10

manual may be reproduced or translated without prior written consent from Tyan

Computer Corp.

All registered and unregistered trademarks and company names contained in this

manual are propery of their respective companies including, but not limited to the

following.

AMI is a trademark of American Megatrend Incorporated

Windows is a trademark of Microsoft Corporation.

IBM, PC, AT, PS/2 are trademarks of IBM Corporation.

INTEL, Pentium II, Celeron are trademarks of Intel Corporation.

S2054 Tomcat i810 is a trademark of TYAN Computer Corporation.

Information contained in this publication has been carefully checked for accuracy and

reliability. In no event will Tyan Computer be held liable for any direct or indirect,

incidental or consequential damage, loss of use, loss of data, or other malady resulting

from errors or inaccuracies of information contained in this manual. The information

contained in this document is subject to change without notice.

PRINTED IN TAIWAN.

Содержание S2054










































































Результаты поиска

Содержание S2054

Отзывы:

Похожие инструкции для S2054

Бренды по названию

Популярные бренды

TYAN S2054, Руководство пользователя

Результаты поиска

Содержание S2054

Отзывы:

Похожие инструкции для S2054

Бренды по названию

Популярные бренды