manualshive.com logo in svg

TYAN B5556G24EV4HR-2T, Руководство сервисного инженера

Поделиться
Скачать
TYAN B5556G24EV4HR-2T Скачать руководство пользователя страница 2

 

2 

http://www.tyan.com

 

PREFACE 

 
 

Copyright 

This publication, including all photographs, illustrations, and software, is 
protected under international copyright laws, with all rights reserved. 
Neither this manual, nor any material contained herein, may be reproduced 
without written consent of manufacturer. 
 
Copyright 2019 MITAC COMPUTING TECHNOLOGY CORPORATION. All 
rights reserved.

 

TYAN

®

 is a registered trademark of MITAC COMPUTING 

TECHNOLOGY CORPORATION.   
 
Version 1.0c 

 
Disclaimer  

Information contained in this document is furnished by MITAC COMPUTING 
TECHNOLOGY CORPORATION and has been reviewed for accuracy and 
reliability prior to printing. MITAC assumes no liability whatsoever, and 
disclaims any express or implied warranty, relating to sale and/or use of TYAN

®

 

products including liability or warranties relating to fitness for a particular 
purpose or merchantability. MITAC retains the right to make changes to 
produce descriptions and/or specifications at any time, without notice. In no 
event will MITAC be held liable for any direct or indirect, incidental or 
consequential damage, loss of use, loss of data or other malady resulting from 
errors or inaccuracies of information contained in this document. 

 
Trademark Recognition 

All registered and unregistered trademarks and company names contained in 
this manual are property of their respective owners including, but not limited to 
the following. 
 
TYAN

®

 is a trademark of MITAC COMPUTING TECHNOLOGY 

CORPORATION. 
Intel

®

 is a trademark of Intel

®

 Corporation. 

AMI

®

, AMIBIOS

® 

and combinations thereof are trademarks of AMI 

Technologies. 
Microsoft

®

, Windows

®

 are trademarks of Microsoft Corporation. 

IBM

®

, PC

®

, AT

®

 and PS/2

®

 are trademarks of IBM Corporation. 

Winbond

®

 is a trademark of Winbond Electronics Corporation. 

Содержание B5556G24EV4HR-2T









































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды