TXU Energy iThermostat, Руководство по установке

Страница: 31 / 34

iThermostat ™ Installation Manual 29
Example:
1. You have selected 3:00 hours for the Temporary Program Override time period.
2. With the thermostat set to Heat or Cool, press
HOLD
for approximately 5 seconds until HOLD
time (3:00 indicating 3 hours) appears as a setting reminder.
3. After releasing the button, "HOLD" on the display will blink.
4. Use
and to set the temperature to your preference. The thermostat will maintain this
temperature setting for 3 hours with "HOLD" blinking to remind you it is in Temporary Hold. After
3 hours, the thermostat will go back to the program temperature and "HOLD" will no longer blink or
display.
11)
Temperature Readout Units:
(Default Setting -
F °
)
Changes the display readout to Celsius (Centigrade) or Fahrenheit as required.
12)
Limited Heat Range Feature:
(Default Setting -
90F °
)
This feature provides a maximum setpoint temperature for heat. The default setting is 90°F. It can be
changed between 62°F and 89°F by pressing the
or key.
13)
Limited Cool Range Feature:
(Default Setting -
45F °
)
This feature provides a minimum setpoint temperature for cool. The default setting is 45°F. It can be
changed between 46°F and 82°F by pressing the
or key.