Laser Welding Machine
Address: 18 South Liu Fang Yuan Road,Sintec Industrial Park, Wuhan Hubei, 430205 PR China
Tel: 0086 27 65523998 Mobile/WhatsApp/Wechat:0086-17371095681
Web:http://www.txtlaser.com/ ; E-mail: [email protected]
第
41
页
increase from the initial power to the maximum power when starting.
Slow down time: It is used to set the time for the laser analog voltage to slowly
decrease from the maximum power change to the light-off power when the
laser is stopped.
Laser on: used to set the starting power of the laser, which is a percentage of
the welding power.
Laser progressive time: Control the time it takes for the laser light to slowly rise
to the set power.
Off optical power: used to set the off optical power of the laser, which is the
percentage of welding power.
Gradual off light time: Control the time it takes for the laser off light power to
slowly decrease.
Language: Used to switch the language switch.
Delay of opening gas in advance: When starting the processing, you can set
the delay of opening the gas. When the external start button is pressed, the air
will be blown out for a period of time, and then the laser will be emitted.
Delayed gas shut-off delay: When stopping processing, delayed gas shut-off
can be set. When stopping processing, first stop the laser, after a delay for a
period of time, and then stop blowing.
Automatic swing: used to set the galvanometer to automatically swing; when
the automatic swing is enabled, when the safety lock is turned on, the
galvanometer will swing automatically, and when the safety lock is not turned
on, the galvanometer motor will automatically stop swinging after a period of
delay.
Device parameter: It is used to switch to the device parameter page, and a
password is required.
Authorization: used for authorization management of the motherboard.
Device ID: used to set the Bluetooth ID of the control system. When the user
has multiple devices, the number can be freely defined for management.
