Laser Welding Machine
Address: 18 South Liu Fang Yuan Road,Sintec Industrial Park, Wuhan Hubei, 430205 PR China
Tel: 0086 27 65523998 Mobile/WhatsApp/Wechat:0086-17371095681
Web:http://www.txtlaser.com/ ; E-mail: [email protected]
第
32
页
●
Precautions for cleaning the tip
1. When cleaning the tip, do not wipe with water or corrosive liquids, and do not blow any
part of the tip with an air gun or strong wind.
2. When replacing the protective lens, pay attention to keeping the surrounding
environment clean. The fan or air conditioner should be turned off. When the protective
lens is pulled out, the gap of the gun body should be sealed with tape in time, and dust is
strictly prohibited from entering the gun body.
3. There are many groups of high-power fragile reflective lenses inside the welding torch
head, and it is strictly forbidden to bump and drop when using the welding torch head.
●
Notes on replacing the cleaning protection sheet:
★
Do not reuse the lint-free cotton cloth or swab to wipe the protective lens.
★
Do not touch the protective lens with your fingers.
★
Do not blow directly with the mouth to protect the dirt on the surface of the lens, as
this may bring new dirt.
★
Do not touch the tip of the cleaning swab with your fingers.
★
Don't forget to clean when replacing the mirror drawer.
★
When using compressed air, please do not blow the dirt directly from the front, and
use the method of blowing from the side to avoid the dirt from sneaking into the
surface.
★
In particular, powder-free gloves or finger cots must be worn when cleaning
the product. It is now clear that if the damage is caused by, improper handling
or the use of incorrect cleaning procedures or chemical use, damage due to
such causes is not covered by the warranty.
