Document name/
文件名称
Battery Specification/
电池规格书
Product Model/
产品型号
BLP661
Document NO/
文件编号
RD-PSP-BLP661-01
Revision/
版本
01
Date/
日期
2018-01-03
Page/
页码
16/ 18
--- TWS Confidential ---
Form No.: TWS-IMS-2001-01--04c REV
：
C
inspection items, inspection sequence, rules of judgment, etc. should be determined by consultation between the
supplier and the customer. In principle, all the tests aforementioned should be included. Quality conformance
inspection is divided into lot by lot inspection and periodic inspection. These inspections are used to judge whether
the production process can ensure the sustaining stability of product quality. Refer to national standard
GB2828.1-2003 and GB2829-2002 for implementation. Specific sampling scheme, inspection items, inspection
sequence, rules of judgment, etc. should be determined by consultation between the supplier and the customer. In
principle, the lot-by-lot inspection items should include appearance, internal impedance, rated capacity or 1C
5
A
discharge capacity. /
鉴定检验一般在设计定型、更改设计和生产定型时进行。抽样方案、检验项目、顺序以
及判定规则等事宜由供需双方协商确定。原则上应包括以上各项性能试验。质量一致性检验分为逐批检查
和周期检查，用以判定产品生产过程中能否合格保证产品质量的持续稳定。可以参照 GB2828.1-2003、
GB2829-2002 标准执行。具体抽样方案、检验项目、顺序以及判定规则等事宜由供需双方协商确定。原则上，
逐批检查的检验项目应包括外观、内阻、额定容量或 1C
5
A 放电容量等。
18
Miscellaneous/
其他事项
The aforementioned could be used as agreed framework by both parties for battery performance and inspection
specifications. It should be implemented if there is no new written agreement or change notice. /
以上所述，可以作
为供需双方对电池产品性能和检验规则的约定框架。如果没有新的书面约定或更改通 知，即可按此执行。
19
Drawing/
附图
19.1 Circuit Diagram/
电路原理图
19.2 PCB Layout drawing/PCB
布线图