TWR Lighting E-1DB2, Руководство пользователя

Страница: 7 / 49

M.E-2009.E-1DB2
3/25/07 – rev. 5/28/09
E-1DB2 CONTROLLER
2.3.1 Connect the BLACK wire from the photocell to TB1-8.
2.3.2 Connect the RED wire from the photocell to TB1-9.
2.3.3 Connect the WHITE wire from the photocell to TB1-10.
2.3.4 Install the photocell into the receptacle and twist to the right while depressing
to lock into place.
2.4 POWER WIRING
(Refer to Drawing H40-329)
Power wiring to the control cabinet should be in accordance with local methods and
the National Electric Code (NEC).
2.4.1 A 15 amp circuit breaker is recommended at service panel.
2.4.2 Connect the "HOT" side of the 120V AC line to TB1-11.
2.4.3 Connect the "NEUTRAL" side of the 120V AC line to TB1-12.
2.4.4 Connect the AC ground to the ground stud to the lower right of the terminal
block TB1.
2.4.5 Controller panel should be connected to the tower and/or building grounding
system with the exception of installations on AM RF Applications where
controller grounding to earth ground is prohibited. Ground the controller only
to the tower itself using a suitable RF ground.
2.5 TOWER LIGHTING KIT
When installing this system, the customer will need to use strobe cable wiring
method to wire the strobe beacon. Refer to drawing 600-04 for cable installations.
3