Last
update:
2020/09/07
14:44
torpedo_captor_x:torpedo_captor_x_user_s_manual https://wiki.two-notes.com/doku.php?id=torpedo_captor_x:torpedo_captor_x_user_s_manual
https://wiki.two-notes.com/
Printed on 2020/09/07 17:45
The noise gate is useful if you are using a high gain amp and want to keep your signal quiet
when you are not playing, or use vintage style single coil pickups. The threshold sets the
level where the noise gate is active: if you are over this level the noise gate is off, if you are
under, the noise gate is active. The Learn button automatically sets the Threshold level.
Keep your guitar volume to the maximum, mute your strings with your hand and click on the
Learn button. The Noise Gate will listen to the input sound and set the threshold level
accordingly. Make sure to mute your strings for at least 3 seconds so the Learn can properly
analyse the input signal.
4.2.3.2 EQ
< 100% 30% 70% >
The EQ section has 3 modes of operations: guitar, bass
and custom. Guitar and Bass are 5 band eqs, with a
gain range of -20dB to +20dB. The Custom mode gives
you access to a 5 band semi parametric eq and a high
pass filter.
Guitar mode: 120Hz, 360Hz, 800Hz, 2000Hz, 6000Hz (centre frequency of each band from the lower
to the highest).
Bass mode: 50Hz, 120Hz, 360Hz, 800Hz, 4000Hz (centre frequency of each band, from the lowest to
the highest)
Custom mode: the bands are as follow:
Low Cut: low cut, 10 - 500Hz (12 dB per octave slope)
Low: low shelf, 60 - 240 Hz, +/-20dB
LMid: peak, 180 - 720 Hz, +/-20dB
Mid: peak, 400 - 1600 Hz, +/-20dB
HMid: peak, 1 - 4 kHz, +/-20dB
High: peak, 3 - 12kHz, +/-20dB
4.2.3.3 Enhancer
The Enhancer is a combination of dynamic and tone-
shaping tools especially tailored for your guitar and/or
bass.
The Dry/Wet allows you to balance the cab sim signal and the processed signal by the Enhancer. At
zero (knob turned all the way down), only the cab sim signal is heard. At halfway position, the level of
the cab sim signal is equal to the level of the enhancer. At full (knob turned all the way up), you are
only hearing the signal processed by the Enhancer.
Body is a compressor with a high-pass filter (set at 100hz in Guitar mode and 150hz in Bass mode). It
only affects the low-mids and above frequencies of the signal. Body will render your tone fuller and
more present. Thickness and Brilliance emphasize the low end and high end of the tone, respectively.
Thickness is centered at 400 Hz in Guitar mode and 150 Hz in bass mode.
Brilliance is centered at 1500hz in Guitar mode and 2000hz in bass mode. Both Thickness and
Brilliance have a gain range between 0 and +15dB.
