2020/09/07 17:45
29/36
Torpedo Captor X User's Manual
User's manuals - https://wiki.two-notes.com/
This section of Torpedo Remote sets the hardware parameters of the unit such as the audio latency,
the MIDI mapping, the white LED, etc. You will also find the serial number of the unit, as well as the
firmware version. You will also set the reference point for the tuner. By default, it is set at 440 hz.
6.1 MIDI
The Torpedo Captor X handles both preset change commands (Program Change or PC) and parameter
change commands (Control Change or CC). This way, you can interact with all the parameters on the
unit from any kind of standard MIDI controller, like a MIDI pedalboard or a keyboard.
Select if the unit is to receive to Program Change and/or Control Change commands. For
1.
example, if you plan to use the preset switching (PC), the CC receive can be Off.
Set a MIDI channel for the unit to receive. You can choose to receive all channels, which is
2.
useful when you don’t know exactly on which channel the commands are sent.
With the MIDI monitor, check the correct reception of the commands by the Torpedo Captor X.
3.
See section 7.1 MIDI Mapping for the tables concerning Program Change and Command Change.
