Twister T4, Руководство пользователя

Страница: 5 / 34

T W I S T E R T R I M M E R . C O M p g | 3
Connection and Electrical Safety Information
• The Trim Saver requires a 120V, 15A circuit breaker.
• The Trim Saver must be used in connec on with a properly grounded receptacle. Refer to
Speci fi ca ঞ ons on page 20 to determine the correct electrical requirements.
• Observe all applicable building and electrical codes.
• Do not overload outlets as this can result in fi re or electric shock.
• Do not use extension cords with a diameter narrower than 12AWG.
• Do not use extension cords longer than 50’ (15M).
• To power down the Trim Saver, switch it o ff using the motor switch before unplugging
the machine.
• The motor is not water ght. Do not get the motor wet while cleaning to prevent electric
shock.
• Cover the end of the plug before cleaning to prevent electric shock.
Assembly Safety Information
• Subs tu ng factory parts with third-party parts may result in bodily harm or damage to
the
Trim Saver.
• Do not skip any assembly steps. Complete all steps in order.
• Do not connect the Trim Saver to a power source un l it is fully assembled.
• The motor is heavy and fragile. Use two people to a ach it to the rest of the machine.
Operation and Maintenance Safety Information
• Do not allow anyone to operate the Trim Saver unless it is fully assembled.
• Do not switch on the Trim Saver unless it is connected to the T4 trimmer.
• Do not disassemble the Trim Saver unless it is disconnected from power and the impeller
has come to a complete stop. The impeller may con nue to spin for up to 30 seconds
a er stopping the Trim Saver.
I M P O R T A N T S A F E T Y I N F O R M A T I O N