manualshive.com logo in svg

Twister T4, Руководство пользователя

Поделиться
Скачать
Twister T4 Скачать руководство пользователя страница 29

T W I S T E R T R I M M E R . C O M

 

• 

Improper electrical connec  on

 • Neglect
 • Normal 

wear

 • Unapproved 

modi

fi

 ca  ons including the use of unapproved replacement parts.

Keirton assumes no risk and shall be subject to no liability for damages or loss resul  ng from the 
speci

fi

 c use or applica  on made of the product. In no event will Keirton be liable for any special, 

incidental, or consequen  al damages (including loss of use, loss of pro

fi

 t, and claims of third par  es) 

however caused, whether by negligence of the manufacturer or otherwise. If you have any ques  ons 
regarding your warranty rights and responsibili  es, please contact Keirton.

The Trim Saver is intended for use on legal aroma  c herbs and hops. Please check all municipal, 
provincial/state, and federal laws and regula  ons before using the Trim Saver. Keirton does not 
promote or condone the use of the Trim Saver in any way that may be deemed illegal.

Allow only persons who understand this manual to operate the Trim Saver. Keirton claims no liability 
for any damage or injury that results from the use of the Trim Saver by persons who have not read and 
understood the cau  ons, warnings, and danger no  ces contained in this manual or through any misuse 
of the Trim Saver. You are responsible for your safety while opera  ng this machine. 

Please keep 

yourself safe!

p g   |   2 7

W A R R A N T Y   I N F O R M A T I O N

Содержание T4



































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды