Twister T4, Руководство пользователя

Страница: 15 / 34

T W I S T E R T R I M M E R . C O M
Step 6: Attach the Motor Assembly to the Motor Support
The motor assembly is heavy and fragile. Use two people
to complete this step.
1. Open fastener bag E . Bag E contains:
• Four ⁄ ”–18 x 1” hex head bolts.
• Four ⁄ ” Star Lock Washers
• Four ⁄ ” Flat Washers
• Four ⁄ ”–18 Nyloc Nuts.
2. Place a piece of foam packaging over the
wide end of the lid holder, then rotate the Trim
Saver 90 so it rests on the foam (see Fig. 13).
3. Place all four bolts through the fl at washers, then through the motor assembly and
motor support (see Fig. 14).
4. Reaching through the two large holes in the motor support, secure the star lock washers
and nuts over the ends of the bolts (see Fig 15).
6. Rotate the Trim Saver back so it rests on the casters.
Fig. 12 Fig. 13
THE MOTOR IS HEAVY. USE TWO
PEOPLE TO LIFT.
WARNING
!
p g | 1 3
A S S E M B L Y