www.tsicustomerservice.com
A487
13
FUNCTION
FLAME
POWER
Pressing the UPLIGHT button on the remote will change the
uplight between the 7 settings and OFF(00).
U1: Blue U2: Red U3: Green
U4: Red+Blue U5: Blue+Green U6: Red+Green
U7: Red+Blue+Green
AU(auto-cycling)
HEATER
TIMER
UPLIGHT
ICON
DESCRIPTION
OPERATION INSTRUCTIONS
Pressing the timer button will cycle through the timer settings; 30
minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H and off(00).
To cancel the timer once set press the TIMER button twice and
the display will flash 00 to show the timer has been canceled.
The fireplace contains two infrared quartz heating elements.
The default temperature is 22 °C (72 °F).
The thermostat setting range is 17°C - 27°C (62°F - 82°F) or
continously ON or 00 (OFF). To set flame effect so that it works
without heat, press the heater button until the display shows “00”.
The thermostat is adjustable by 1°C or 2°F increments.
The up and down buttons “
” on the remote will increase /
decrease temperature setting.
To change between °C and °F press and hold the HEATER button on
the control panel for 3 seconds.
The POWER button supplies power to all the functions of the
heater. Pressing the POWER button again the heater will be
put in standby mode. This will turn off all functions at once
but will hold the settings in the memory. By
pressing the Power button again the unit will turn on at the
same settings.
With the power on press and hold the Power button on the
control panel for 10 seconds to disable or re-enable the heater
function. Once disable or re-enabled the emberbed lights will
flash multiple times.
There are 7 flame effects that can be selected and 00(off)
setting.
F1: Red F2: Blue
F3: Blue+Red F4: Blue+Red
F5: Yellow F6: Blue
F7: Red
AU: Auto Cycle which will automatically fade in and fade out a new
color flame effect periodically.
FLAME SPEED
Each Spectrafire
TM
flame colour option has speed options available.
Setting S1 is slowest ranging up to setting S5 which is the fastest.
FLAME INTENSITY
Each Spectrafire
TM
flame colour option has 5 intensity options
available.