7
Fig. 9
FF
K
Hardware Used
FF
Screw
x 5
9. Insert Stabilizer Frame (K) once the cooler is in the
correct position. Fasten the positioning panel with
wood screws (FF). Wedge the Stabilizer Frame
(K) between the top of the cooler and mantel.
Fasten with wood screws (FF).
Fig. 10
Completed
Unit
Electric
Fireplace Insert
Install
Insert
From
Back
AA BB
H
Hardware Used
BB
AA
Bolt x
2
Washer x
2
10. Lift insert carefully into the back of the unit and
center in the insert opening. Do not drag insert
across hearth/base as it may scratch the unit.
Connect the Insert Support Bar (H) to the inside left
and right panels, using the bolt (AA) and washer
(BB) through pre-drilled holes.
MOVE YOUR COMPLETED UNIT ONLY SHORT
DISTANCES. MOVE COMPLETED UNIT WITH
GREAT CARE. IT TAKES TWO PEOPLE TO
MOVE COMPLETED UNIT INTO ITS FINAL
POSITION.
