4
ASSEMBLY INSTRUCTIONS
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and diagram above. If any part is missing or damaged, do not attempt to
assemble, install or operate the product. Contact customer service for replacement parts.
Estimated Assembly Time: 60 Minutes
Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife
Fig. 1
1. Locate the Left Side Panel (E), Center Left Shelf
(B), Center Panel (D), Center Right Shelf (C), Right
Side Panel (F), and set out face down on a
scratch-free surface.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Push the Left Side Panel (E) and Center Panel (D)
snug to the Center Left Shelf (B). Make sure the
Wood Dowels are seated in the pre-drilled holes.
Using Bolts (AA) and Washers (BB) attach panels
through pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Push the Center Right Shelf (C) and Right Side
Panel (F) snug to the Center Panel (D). Make
sure the Wood Dowels are seated in the pre-drilled
holes. Using Bolts (AA) and Washers (BB) attach
panels through pre-drilled holes in the mounting
blocks.
HAND TIGHTEN ONLY.
F
E
BB
AA
CC
C
B
D
CC
CC
Fig. 2
2. Locate Hearth/Base (A) and set out
fi
nished side up
on the
fl
oor.
Insert one Wood Dowel (CC) into each of the
pre-drilled holes.
Attach the Completed assembly from step 1 to the
Hearth/Base (A). Make sure that dowels are seated
into the pre-drilled holes in the Hearth/Base. Using
Bolts (AA) and Washers (BB) attach panels through
pre-drilled holes in the mounting blocks.
HAND TIGHTEN ONLY.
Hardware Used
Hardware Used
BB
BB
AA
AA
CC
CC
Bolt
Bolt
x 8
x 7
Washer
Washer
x 8
x 7
Wood Dowel
Wood Dowel
x 10
x 6
BB
A
AA
CC
