3
PORTABLE LP CONNECTION
The Salamangrill has the option to be installed in a TSGB-24.
1.
To install the gas cylinder, place the base of the cylinder in the opening in the base of the grill
base. Be sure its seated flat.
2.
Check to ensure that the tank’s gas valve on top of the cylinder is closed.
3.
Connect the LP regulator (included) to the cylinder and hand-tighten only. Open the tank
valve and make sure all connections are leak tight using a soapy water solution.
(Reference page 5 for leak test procedure).
WARNING
•
DO NOT STORE SPARE LP-GAS CYLINDER UNDER OR NEAR THIS APPLIANCE.
•
NEVER FILL THE CYLINDER BEYOND 80 PERCENT FULL.
•
FAILURE TO DO SO A FIRE CAUSING DEATH OR SERIOUS INJURY MAY OCCUR.
IMPORTANT INFORMATION:
•
NOTE: use only a 20-lbs (5 gallon capacity) gas cylinder.
•
WARNING: DO NOT USE A DENTED OR RUSTED LP CYLINDER.
•
NEVER USE A CYLINDER WITH A DAMAGED VALVE.
•
ALWAYS CHECK FOR LEAKS AFTER CHANGING THE LP CYLINDER.
•
THE LP PRESSURE REGULATOR AND HOSE SUPPLIED WITH THIS UNIT MUST BE USED
WITHOUT ALTERATION.
