twin busch 0741187302364, Инструкция по установке, эксплуатации и ремонту

Страница: 9 / 36

Twin Busch GmbH
9
4.3 Operation instructions
Raise the lift
1. Make sure that you have read and understood the operation manual before operation.
2. Park the vehicle between two posts.
3. Adjust the lifting arms until they reach the supporting positions of the vehicle and make sure the gravity of vehicle located in
the center of four lifting arms.
4. Connect the power supply and switch on.
5. Press the”UP”button on the control box until the pads of lifting arms touched the prop-position of vehicle.
6. Keep on raising the vehicle to let it have a bit clearance from the ground and check again its stability.
7. Raise the vehicle to the desired height, and turn off the power and then perform maintenance or repair work underneath.
Lower the lift
1. Switch on.
2. Press the “DOWN” button on the control box. Meanwhile the lifting arms automatically go upwards about 5CM which releases
the safety lock. The lift lowers.
3. After the lifting arms lower to the lowest position, pull them out from under the vehicle and clear up all the obstacles.
4. Drive the vehicle away.
Description Function
Power Switch Control power
Power indicator Indicate if power being connected
UP button Raise the lift
Safety lock button Ensure safety in operation process
DOWN button Lower the lift
Emergency stop Ensure safety