TVS electronics Jus' Bill RP-35 Скачать руководство пользователя страница 3

Страница: 3 / 42

SAFETY INSTRUCTIONS

which must be strictly observed !

•

To prevent personal injury or property

To prevent personal injury or property damage, the following shall be

damage, the following shall be

strictly observed.

•

The degree of possible injury and damage due to incorrect use or

improperly following instructions is described below.

Indicates a situation which, if not observed

Warning

Caution

and handled pro

and handled properly, could result in death

perly, could result in death

or serious injury.

Indicates a situation which, if not observed

and handled properly, could result in injury.

Meaning of symbols

This symbol indicates that something must be handled carefully.

This symbol indicates som

This symbol indicates something that must not be done.

ething that must not be done.

This symbol indicates something that must be done.

2222

Содержание Jus' Bill RP-35











































Результаты поиска

Содержание Jus' Bill RP-35

Отзывы:

Бренды по названию

Популярные бренды

TVS electronics Jus' Bill RP-35, Руководство пользователя

Результаты поиска

Содержание Jus' Bill RP-35

Отзывы:

Бренды по названию

Популярные бренды