Tvone MOD-16416-1FO, Быстрый старт, Страница: 16 / 20

14
MOD-16416-DP1FO
NOTE: This package is similar to the DVI1FO package, except for the fact that all
inputs will be DisplayPort instead of DVI. Refer to the connection instructions for
the DVI1FO version if needed.
1. Connect the up to 16 DisplayPort sources to the DisplayPort inputs on the
matrix.
2. Connect a single strand of SC-terminated multimode fi ber optic cable from
each SC connector on the Output Card to each Receiver unit.
3. Connect a DVI cable from the DVI Out port on the Receiver unit to a display.
4. Connect the power supply to the 1FO Receiver unit and to an available
electrical outlet.
5. Connect both AC power cords from the matrix to available electrical outlets.
Connecting both AC power cords will provide power redundancy should
one of the power supplies fail. It is recommended to connect each AC power
cord to separate circuits.
The Link indicator will glow bright green to indicate a connection between
the matrix and the Receiver unit. If this LED is off , inspect the fi ber optic
cable for defects.
Quick Start Guide