Tvone MOD-16416-1FO, Быстрый старт, Страница: 15 / 20

13
MOD-16416-1FO (continued)
50μ OM3e/OM4, OM3, and 62.5μ OM1 multimode fi ber optic cable can be
used. However, the maximum extension distance is dependent upon the
type of fi ber optic cable used:
• 6600 feet (2000 meters) using 50μ OM3e/OM4 multimode fi ber optic cable.
• 2000 feet (600 meters) using 50μ OM3 multimode fi ber optic cable.
• 660 feet (200 meters) using 62.5μ OM1 multimode fi ber optic cable.
2. Connect a DVI source to the DVI input of each DVI Fiber Optic Sender unit.
3. Using single strand SC-terminated multimode fi ber optic cables, connect up
to 16 DVI Fiber Optic Receiver Units to the SC connectors of the ModularMX
Matrix Fiber Output Card.
4. Connect a DVI display to each Receiver unit.
5. Connect the locking power supply to the Sender and Receiver units and to
available electrical outlets. The Power LED indicators will glow bright blue
when both units are powered-on.
Connect both AC power cords from the matrix to available electrical outlets.
This will provide power redundancy should one of the power supplies fail. It
is recommended to connect each AC power cord to separate circuits.
The Link LED’s on the modular
When the Sender and Receiver units are powered-on, the Link LED
indicators will glow bright green to indicate a connection between the matrix
and the Sender and Receiver units. If this LED is off , inspect the fi ber optic
cable for defects.
to DVI display
DVI-1FO-R
Quick Start Guide