Tvone MOD-16416-1FO Скачать руководство пользователя страница 1

16x16 ModularMX Matrix

MOD-16416-DVI • MOD-16416-DVIELR • MOD-16416-DVI1FO

MOD-16416-DPDVI • MOD-16416-DPELR • MOD-16416-DP1FO

MOD-16416-1FO • MOD-16416-ELR

tvONE 16x16 ModularMX Matrix

Congratulations on your purchase of the 16x16 ModularMX Matrix. Your complete satisfaction is very important to us.

The tvONE 16x16 ModularMX Matrix provides an all-in-one  professional solution to route up to 16 DVI or DisplayPort sources  to any 16 DVI outputs supporting 
resolutions up to 1920 x 1200.  The modular design of this 16x16 matrix provides the ultimate in fl exibility by allowing the combination of diff erent input and output cards 
and the extension of inputs and outputs over CAT5-ELR or fi ber. The front-panel LCD displays the current routing status and each source is accessible to any display 
by using the front-panel push buttons, the RS-232 interface, or through IP Control (with built-in web server, Telnet, and UDP). Hot-swappable dual redundant power 
supplies allow these matrixes to be used for applications in demanding 24/7 applications where enhanced reliability, ease of servicing and zero down-time are required. 

Quick Start Guide

Содержание MOD-16416-1FO





















Отзывы: