Page | 10
Software Application
Please download the software from the 1T-CL-322 product page at
www.tvone.com with the file name
1T-CL-SW
and save it in a directory
where you may use it later.
Note: The default setting of the 1T-CL-322 IP address is 192.168.1.50
Connect the 1T-CL-322 to an Ethernet network. Connect your
PC/Laptop using the same Ethernet network. Open the 1T-CL-SW
application. Click on Find Devices on Network and a list of the devices
connected to the Control System will show up.
The user may use the discovered IP Address to access the unit. Open
your internet browser and type the IP address into the address bar.
Alternatively the user can launch the WebUI directly from the 1T-CL-
SW application by clicking on the discovered device (highlighted in
blue) which launches the InfoForm then clicking the
Web GUI
, this
opens the default browser at the login page. It is also possible to
control the unit through a telnet application as well.
