16 Reference Monitor
Reference Monitor 17
●
This product provides a REMOTE
CONTROL mode. The user may connect
RJ-45 jack to the REMOTE terminal on the
rear of the unit and designate a function
for each pin.
●
The default settings are as follows:
PIN 1 : ANALOG CHANNEL
PIN 2 : SDI-A CHANNEL
PIN 3 : SDI-B CHANNEL
PIN 4 : PBP CHANNEL
PIN 5 : TALLY R
PIN 6 : TALLY G
PIN 7 is POWER ON/OFF use only, PIN 8 is GND
- Use the ENTER button and UP/DOWN button
to set the desired function.
XVM-177A
SDI A
[5] GPI
5. Menu Operations
PAGE I >> PAGE II
GPI 1
GPI 2
GPI 3
GPI 4
GPI 5
GPI 6
GPI 7
GPI 8
ANALOG CHANNEL
SDI-A CHANNEL
SDI-B CHANNEL
PBP CHANNEL
TALLY R
TALLY G
POWER ON
GND
REMOTE (RJ-45)
1: Pin1
2: Pin2
3: Pin3
4: Pin4
5: Pin5
6: Pin6
7: Pin7
8: GND
1
8
Menu
Classifi-
cation
Settable Values
PIN
1~6
NONE,
ANALOG CHANNEL,
SDI-A CHANNEL,
SDI-B CHANNEL,
PBP CHANNEL,
TALLY R,
TALLY G,
UNDER SCAN,
1:1 SCAN, ASPECT,
H/V DELAY,
BLUE ONLY,
MONO,
16:9 MARKER,
4:3 MARKER,
4:3 ON AIR MARKER,
15:9 MARKER,
14:9 MARKER,
13:9 MARKER,
1.85:1 MARKER,
2.35:1 MARKER,
1.85:1&4:3 MARKER,
CENTER MARKER,
SAFETY AREA 80%,
SAFETY AREA 85%,
SAFETY AREA 88%,
SAFETY AREA 90%,
SAFETY AREA 93%,
SAFETY AREA 100%,
708,
608(LINE21),
608(ANC),
OP47,
OP42,
OP47/42(AUTO)
TELETEXT PAGE 801,
TELETEXT PAGE 888,
TELETEXT PAGE 889
PIN 7
POWER ON/OFF CONTROL
PIN 8
GND
●
GROUP ID
- Used to control several monitors in a group
for the TVLogic control protocol using RS-
422/485 communication or network.
●
MONITER ID
- Used to set the ID of each monitor for the
TVLogic control protocol or DYNAMIC UMD
using RS-422/485 communication.
- Available values are 0,2,4 ~ 98.
- Right screen in PBP mode is automatically set
to +1 of the monitor ID.
●
ID SETTING APPLY
- Used to set the unit’s GROUP ID and MONITOR
ID which are set above menus.
●
UMD DISPLAY (Under Monitor Display)
- Used to set input source ID mode.
- Available modes are UMD, ANC, D-UMD(S-
8C), D-UMD(S-16C), D-UMD(D-8C) and OFF.
- If UMD menu is selected, characters or tally
data in the black bar displays on the bottom
of the screen. The vertical aspect ratio of the
image changes on the screen as the bar on
the bottom of screen appears.
- In the USER ASPECT mode, the UMD bar
displays semi-transparently and the screen
keeps its USER ASPECT ratio.
* UMD : Displays user customized 8 characters
on screen.
* ANC : Displays characters embedded in SDI
signal.
* D-UMD(S-8C) : Displays incoming data of 8
characters and tally signal from TSL protocol
(V3.1).
* D-UMD(S-16C) : Displays incoming data of 16
characters and tally signal from TSL protocol
(V3.1).
* D-UMD(D-8C) : Displays incoming data
of two pairs of 8 character strings and tally
signals from TSL protocol (V3.1).
XVM-177A
SDI A
[5] GPI
5. Menu Operations
PAGE II >> PAGE III
GROUP ID
MONITOR ID
ID SETTING APPLY
UMD DISPLAY
UMD CHARACTER
REMOTE CONTROL
UMD CHARACTER COLOR
UMB BG. TRANS
0
0
OFF
OFF
CHANNEL 1
ETHERNET
GREEN
SCALE DOWN
- In PBP mode, even if D-UMD(S-8C),
D-UMD(S16C) and D-UMD(D-8C) are
selected, only D-UMD (S-8C) activates.
- In PBP mode, each D-UMD(S-8C) for left
screen and right screen are activated.
- Adjustments for each setting are available.
●
UMD CHARACTER
- Used to customize the characters for UMD.
- Alphabets, numbers and special symbols are
available.
- Maximum of 8 characters are available.
●
REMOTE CONTROL
- Used to choose how to adjust the monitor.
(Ethernet or RS-422)
●
UMD CHARACTER COLOR
- Used to set the character color of UMD.
- Available colors are WHITE, RED, GREEN,
BLUE, YELLOW, CYAN and MAGENTA.
●
UMD BG. TRANS
- Used to set the transparency of the UMD
background.
- Available values are SCALE DOWN, OPAQUE,
50%, 90% and 100%.
