20 Reference Monitor
Reference Monitor 21
●
DHCP
- Used to control the DHCP function.
●
IP ADDRESS
- Used to set the IP address connected to the
Monitor.
●
SUBNET MASK
- Used to set the SUBNET MASK connected to
the Monitor.
●
GATEWAY
- Used to set the GATEWAY connected to the
Monitor.
●
PORT NO
- Used to set the port number. Default port
number is 10262.
●
SERVER IP ADDR
- Used to set the IP address of TVLogic’s
Controller (RMU Series).
●
SERVER PORT NO
- Used to set the port number of TVLogic’s
Controller (RMU Series).
●
NETWORK SETTING APPLY
- Use to apply changed value of IP ADDRESS,
SUBNET MASK, GATEWAY, PORT NO and so
on.
●
D-UMD TALLY TYPE
- Tally type configuration setting in D-UMD(D-
8C), UMD Display.
- Configuration values are DEFAULT, USER
COLOR, CHARCTER, BG .COLOR, USER TALLY,
USER CHAR and USER BG.
- TALLY1 COLOR ~ TALLY4 COLOR are activated
when USER COLOR is selected.
●
TALLY1 COLOR / TALLY2 COLOR / TALLY3
COLOR / TALLY4 COLOR
- Used to set the color of each TALLY 1, TALLY
2, TALLY 3 and TALLY 4.
- Available colors are RED, GREEN and
YELLOW.
●
UMD FONT SIZE
- This function adjusts the size of UMD FONT.
- Available modes are SMALL, NORMAL and
LARGE.
●
UMD FONT TYPE
- This function sets the Type of UMD FONT.
- Available font types are FONT 1, FONT 2 and
FONT 3.
XVM-177A
XVM-177A
SDI A
SDI A
[5] GPI
5. Menu Operations
PAGE III >> PAGE IV
DHCP
IP ADDRESS
SUBNET MASK
GATEWAY
PORT NO
SERVER IP ADDR
SERVER PORT NO
NETWORK SETTINGS APPLY
PAGE IV >> PAGE I
D-UMD TALLY TYPE
TALLY1 COLOR
TALLY2 COLOR
TALLY3 COLOR
TALLY4 COLOR
UMD FONT SIZE
UMD FONT TYPE
OFF
192.168.123. 0
255.255.128. 0
0. 0. 0. 0
10262
255.255.128. 0
10262
OFF
NORMAL
FONT 1
●
MARKER
- Used to select the marker type when the
MARKER is displayed on the screen.
- Activates only by pressing the MARKER
button on the front of the monitor.
- Compatible MARKER types are as follows:
* AFD(Active Format Description) : If AFD is
selected, the embedded Aspect ratio signal
in the video signal will be extracted and
displayed as a marker.
●
CENTER MARKER
- Used to display the CENTER MARKER on
the screen. This function operates only
after activating the MARKER function by
pressing the MARKER button on the front of
the monitor.
●
SAFETY AREA
- Used to select to display and control the size
of the SAFETY AREA.
- Available types are 80%, 88%, 90%, 93%,
100%, EBU ACTION 16:9, EBU GRAPHIC 16:9,
EBU ACTION 14:9, EBU GRAPHIC 14:9, EBU
ACTION 4:3 and EBU GRAPHIC 4:3.
- This function operates only after activating
the MARKER function by pressing the
MARKER button on the front of the monitor.
●
FIT MARKER
- Used to activate the FIT MARKER function.
- With FIT MARKER “ON”, the safety area is
displayed relative to the marker in use.
With FIT MARKER “OFF”, the safety area is
displayed relative to the incoming source.
- FIT MARKER ON/OFF displays as shown
below.
●
MARKER MAT
- This item darkens the area of the outside
of MARKER setting area. The degree of
darkness is between OFF(Transparency) and
7(Black). The higher the number, the darker
MARKER border becomes.
●
MARKER COLOR
- Used to control the color of MARKER lines.
- Available colors are WHITE, gray, black, red,
green and blue.
●
MARKER THICKNESS
- This item controls the thickness of the
MARKER lines. The degrees of thickness are
between 1 and 7.
MODE
MARKER CLASS
HD
16:9, 4:3, 4:3 ON AIR, 15:9, 14:9,
13:9, 1.85:1, 2.35:1, 1.85:1 & 4:3,
4:3 ALT 16:9, 16:9 ALT 14:9, 16:9 ALT
4:3, AFD, USER
SD 16:9
SD 4:3
16:9, 4:3, 4:3 ON AIR, 15:9, 14:9,
13:9, 1.85:1, 2.35:1, 1.85:1 & 4:3,
4:3 ALT 16:9, 16:9 ALT 14:9, 16:9 ALT
4:3, AFD, USER
XVM-177A
SDI A
[6] MARKER
5. Menu Operations
PAGE I >> PAGE II
MARKER
CENTER MARKER
SAFETY AREA
FIT MARKER
MARKER MAT
MARKER COLOR
MARKER THICKNESS
OFF
OFF
OFF
OFF
OFF
WHITE
4
●
MARKER : 4:3
●
SAFETY AREA : 90%
●
FIT MARKER : OFF
●
MARKER : 4:3
●
SAFETY AREA : 90%
●
FIT MARKER : ON
