TVLogic LVM-173W-3G, Руководство по обслуживанию

Страница: 32 / 57

32
3. Our calibration software supports the automatic detecting of the applied model
connected for most of our monitors.
However, monitors using the Genesis
scaler (LVM-071W, LVM-091W, LVM-XX2W, FCM
and LHM series) cannot afford this feature. In this case, you must choose the applied
model manually. Afterwards, click the “Re -Connect” button for re-connection.
4. If the measuring device is not detected, check and make sure that the “Measuring
Device” selection under the Setting menu is selected correctly.
5. Before starting the calibration, set the gamma and target luminance level in the
Settings menu. (See 3.Setting for more info)
NOTE:
To calibrate the XVM-245W using K-10 probe, select the XVM cal file of K-10
in the setting by pressing “Set” button next to the measuring device selection.
6. Click the “Calibrate” button for the adjustment of the Gamma curve and color
temperatures.
14.7 CABLIBRATION S/W INSTALLATION
Fig 4 Program Calibrating Monitor
3. Our calibration software supports the automatic detection of the applied model
connected for most of our monitors.
However, monitors using the Genesis scaler (LVM-071W, LVM-091W, LVM-XX2W, FCM
and LHM series) does not support feature. In this case, you must choose the applied
model manually. Afterwards, click the “Re-Connect” button for re-connection.
4. If the measuring device is not detected, check and make sure that the “Measuring
Device” selection under the Setting menu is selected correctly.
5. Before starting the calibration, set the gamma and target luminance level in the
Settings menu. (See 3.Setting for more info)
NOTE: To calibrate the XVM-245W using K-10 probe, select the XVM cal file of K-10
in the setting by pressing the “Set” button next to the measuring device selection.
6. Click the “Calibrate” button for the adjustment of the Gamma curve and color
temperatures.