manualshive.com logo in svg

TVILIGHT OPENSKY Zhaga IoT, Руководство по установке

Поделиться
Скачать
TVILIGHT OPENSKY Zhaga IoT Скачать руководство пользователя страница 13

R 166202     |   Rev. D   |   Page 13 of 13

www.tvilight.com

2  If the device shows flashing/ blinking GREEN LED (after powering 

the device for at least 8 hours)

This means that the device is not able to connect to the CMS server. 

This can be due to the following reasons:

1.  The device is not yet registered in the Tvilight CMS. Please get it 

registered using the Scan & Go app (see instructions above).

2.  There is no sim card network reception on the device location. 

(Please note that the sim connection can take as much as 8 hours 

when used for the first time in your region.)

3.  If the above steps did not resolve the issue, then please contact 

Tvilight support desk 

([email protected])

3  Tried everything/ faulty device?

We are very sorry. Please contact: [email protected] for further 

instructions and send the device for (RMA) replacement. 

Further support

We are here for you! Please contact us at 

[email protected]

, our 

preferred partner JIRA portal or 

https://www.tvilight.com/support/

Thank you for purchasing

TVILIGHT

We are proud of your contribution with making our world 

Greener and Safer!!

Содержание OPENSKY Zhaga IoT














Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды