TV One C2-2375A Series, Руководство по эксплуатации

Страница: 31 / 101

C2-2375A S
ERIES
O
PERATION
M
ANUAL
26
7 VIDEO INPUTS AND OUTPUTS
The diagrams below show the left and right-hand halves of the rear panel.
7.1 Computer & Video inputs
The DVI-U inputs can accept:

Digital DVI-D or HDMI signals

Analog Composite Video

Analog Y/C (S-Video)

Analog RGBHV (separate syncs at TTL levels)

Analog RGsB (sync on green)

Analog RGBS (separate sync at TTL levels)

Analog YUV/YPbPr (including tri-level)
For DVI-D, RGBHV, RGBS, RGsB and CV the particular input being used will be
auto-detected.
For all signals except DVI-D, an adaptor cable is required for use. See ‘Connector
pin-outs’ for more information.
Alternatively, the DVI-U input 2 is replicated using the BNCs above – where and
analog source can be fed in. (This has to be manually selected using the ‘Input
type’ selection in ‘Adjust sources’.)
CV and YC sources can be either standard NTSC or PAL inputs – for example,
from a video camera, VCR, DVD player, gaming device, etc. PAL and NTSC
detection is automatic.