TV One C2-2375A Series, Руководство по эксплуатации

Страница: 29 / 101

C2-2375A S
ERIES
O
PERATION
M
ANUAL
24
Button Button Function
Menu navigation
& adjustment
buttons.
Up / down / left / right / SELECT allow quick and easy access to
various menu settings. Press and hold SELECT to store
current settings into memory. They will then be restored on
power-on, or when a Restore is done. See next section for
more information.
DVI-U1 Selects DVI-U1 as the current source for conversion.
DVI-U2 Selects DVI-U2 as the current source for conversion.
SDI Selects the SDI input as the current source for conversion.
Presets 1 to 10 Recalls a preset. These start off blank, but are available to the
user.
GENLOCK Sets Lock mode to Genlock. This locks the unit’s output to the
current Lock source (which defaults to the Ref input). See
‘Adjust output 1’ menu details.
FRAME Sets Lock mode to Framelock. This locks the unit’s output
frame rate to the current Lock source. See ‘Adjust output 1’
menu details.
MIX Sets Lock mode to Lock & Mix, to overlay onto the current Lock
source. Use with the KEY and FADE buttons for more
flexibility. A 2
nd
press will swap foreground and background.
See ‘Adjust output 1’ menu details.
KEY Enables keying for currently selected window – see ‘Adjust
keyers’ menu.
(Key color defaults to black, so black foreground will
disappear.)
ZOOM Jumps to the ‘Zoom’ menu item.
FADE Fades out the current image – fades back in on next press.
FREEZE Freezes the currently selected window
POSN Jumps to the Pan or Pos menu item to allow immediate
panning or positioning of the image.
PIP Activate picture-in-picture mode for the currently selected
window.
SIZE Jumps to the ‘Shrink’ menu item to allow the current window to
be re-sized.
ON/STANDBY Hold in to put the unit into Standby (power-save) mode.
Press once to come out of Standby mode.
6.2 Special button combinations and functions
In addition to the ability to perform a factory reset and forcing certain output
resolutions, other button combinations are available:
These button combinations only work when the unit is switched on and active i.e.
with the STANDBY/ON LED is off. They will not work in Standby mode, or during
power-up.