TV Logic 960H08, Руководство пользователя

Страница: 15 / 84

15
1. SENSOR IN : This terminals can be connected to external sensors.
RELAY
: This terminal blocks connect external electric devices to the product
(Warning Lamp and others).
RS485 : For control the pan and tile cameras. Make sure that the polarity.
2. AUDIO IN : RCA audio in terminals. You can record 16 channels at the same
time.
3. EXTEND (option) : Connect EXTEND FTP cable to VGA or HDMI Receiver
4. RS232C : This is Serial communication(RS232C) cable connection terminal.
5. e-SATA
6. HDMI
: Real HD(1920X1080) output for high resolution monitor
7. VGA : video output for VGA display
8. LAN : This is the Gigabit Ethernet LAN cable connection terminal.
9. USB
: This USB port is for mouse and USB devices.
10. SPOT : For spot CRT monitor, composite signal comes out.
11. DC 12V : DC12V 12.5A or up
12. Power Switch(ON/OFF)
13. AUDIO OUT : RCA audio out terminal.
14. VIDEO IN
: This receives images from cameras and sends them to monitors.
Loop Out : This sends the images from the cameras to the other devices.
v For more details, refer to [CH 2. Installation Method and Cautions].
CH 1 Product Introduction
1. SENSOR IN / RS485, ALARM OUT
14.Video In, Loop Out
8. LAN
5. e-SATA 7. VGA
6. HDMI
12. POWER SWITCH
10. SPOT
3. EXTEND
4. RS232C
2. Audio In
11. DC 12V 9. USB
13. AUDIO OUT
<EYE-ON 960H16R>
[Rear Panel]