25
7. Troubleshooting
DANGER ! Electric shock!
→
Always unplug the mains plug and slide
the protective cover
⑧
over the cutter
blade
⑨
before troubleshooting.
Fault
Possible Cause
Remedy
Hedge trimmer does not start
Extension cable not plugged
in or is damaged.
→Plug in the extension cable
or if necessary replace it.
When rotating the cutting unit,
it was not engaged at 0° or
±90° position.
→When rotating the cutting
unit, engaged it at 0° or ±90°
position.
When tilting the swivel head, it
was not engaged b60°
and -80° position.
→When tilting the swivel head,
engaged it b60°
and -80° position.
Hedge trimmer operates
intermittently
Extension cord damaged.
→Plug in the extension cable
or if necessary replace it.
Internal wiring defective.
→To specify the location to
replace the internal conductor.
On/Off switch defective.
→To specify the location to
change switch.
Hedge is not cleanly cut
Blade blunt or damaged.
→Have blade sharpened and
overhauled.
→To a designated location
replacement blade.
Too much friction, due to lack
of lubricant.
→Apply lubricant spray.
In the event of other faults please contact Local Service.
Repairs should only be carried out by Local service centres or dealers
authorised by Local.
