19
twisting ( upward, toward the
left, toward the right twist ).
1. Put the screws
⑥
to remove.
2. Check whether the normal function of the side
handle
④
.
3. Push the side handle
④
fixing rib is inserted
into the Swivel head
②
corresponding to the
fixed groove, to insert end ( to the side handle
④
on the four hole and the Swivel head
②
above
the four hole aligned) .
4. On The side handle
④
screw on the four screws
⑥
.
5. Check for the side handle rocker
⑤
can move in
three different directions to open the micro
switch.`
Fitting the Guard board:
1.
Put the screws
⑥
to remove.
2.
Check the guard board
⑦
is intact.
3.
Push the guard board
⑦
fixing rib is inserted into
the Swivel head
②
corresponding to the fixed
groove, to insert end ( to the guard board
⑦
on the
two hole and the Swivel head
②
above the two hole
aligned) .
4.
On the guard board
⑦
screw on the two screws
⑥
.
4. Operation
DANGER ! Risk of hysical injury!
→
Slide the protective cover
⑧
over the cutter blade
⑨
.
→
First insert the Hedge
Trimmer plug into the coupling of the
extension cable
⑪
, then plug
